SAM-Q-SDI

Built on the SAM-Q platform, the SAM-Q-SDI brings the freedom to monitor SDI, AES and Analogue audio sources with maximum operational efficiency.

Latest SAM-Q Platform Update - V2.0A

The latest release includes the brand-new audio phase metering mode included as standard, plus additional functions that can be purchased separately and installed as a licenses.

MPA1-SOLO-SDI

At just 100mm deep, our class-leading MPA1-SOLO-SDI unit provides cost-effective confidence audio monitoring for SD, HD and 3G SDI infrastructures. Dual and single input versions available.

MPA1-MIX-SDI-V

The MPA1-MIX-SDI-V provides users with an intuitive yet flexible audio monitoring tool that enables quick and easy creation of audio monitor mixes comprised of embedded SDI audio, AES and analogue audio sources.

MPA1-SOLO-IP

Whether monitoring redundant SDI infrastructures or redundant IP networks, the MPA1-SOLO-IP provides confidence monitoring without compromise.

MPA1-MIX-SDI

The MPA1-MIX-SDI provides users with an intuitive yet flexible audio monitoring tool that enables quick and easy creation of audio monitor mixes comprised of embedded SDI audio, AES and analogue audio sources.

PAM1-MK2

Supports stereo, multichannel, multi-language and surround sound environments via a sophisticated, intuitive control interface.

PAM2-MK2

Supports stereo, multichannel, multi-language and surround sound environments via a sophisticated, intuitive control interface.

TouchMix

The Touchmix is a Touchscreen 48 channel, 2RU, 1 HD/SDI input, rackmount audio mixer/monitor with master volume control, dual function channel gain/balance encoder, headphone socket, USB port, Ethernet, Home Preset save/recall switch and loudspeakers.

PAM1-IP

Developed specifically to address the requirements of customers monitoring uncompressed SMPTE 2022-6 and SMPTE 2110 sources, the PAM-IP features 2 x 10Gig/E interfaces, enabling direct connection to redundant IP networks.

PAM2-IP

The only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks.

MPA1-MIX-MADI

At just 100mm deep, the MPA1 Mix MADI provides users with an intuitive yet flexible audio monitoring tool that enables quick and easy creation of audio monitor mixes comprised of MADI audio sources.

MPA1-SOLO-MADI

At just 100mm deep, our class-leading MPA1-SOLO-MADI provides cost-effective confidence audio monitoring for use where operators need confidence monitoring of a MADI stream.

MPA1-MIX-MADI-V

Based on the already successful MPA1-MIX series of audio monitors, the new MPA1-MIX-V range has been developed to specifically address the challenges of live production and maximise both operational and engineering efficiency.

SAM-Q-SDI

With no extra hardware required, SAM-Q-SDI customers can purchase 1 or 2 optional MADI Input license options at any time providing monitoring and mixing of up to 128 MADI channels.

MPA1-SOLO-DANTE

At just 100mm deep, our class-leading MPA1-SOLO-DANTE unit provides cost-effective confidence audio monitoring for use DANTE and MADI sources.

MPA1-MIX-DANTE

Specifically designed for use where operators need to create a custom mix from a DANTE stream. With powerful user features accessible via the web UI, the MPA-MIX-DANTE is simple to use and flexible enough to meet specific and demanding workflow requirements.

MPA1-MIX-DANTE-V

Specifically designed for use where operators need to create a custom mix from a DANTE stream. With powerful user features accessible via the web UI, the MPA-MIX-DANTE-V is simple to use and flexible enough to meet specific and demanding workflow requirements.

PAM1-IP

The only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks.

PAM2-IP

The only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks.

PAM1-IP

The only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks.

PAM2-IP

The only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks.

PAM1-MK2

Supports stereo, multichannel, multi-language and surround sound environments via a sophisticated, intuitive control interface.

PAM2-MK2

Supports stereo, multichannel, multi-language and surround sound environments via a sophisticated, intuitive control interface.

SAM-Q-SDI

Built on the SAM-Q platform, the SAM-Q-SDI brings the freedom to monitor SDI, AES and Analogue audio sources with maximum operational efficiency.

Loudness Monitoring - SAM-Q Specifications

SAM-Q’s new loudness licenses provides three new loudness modes to the user whilst also providing short-term, momentary and integrated loudness values over an Ethernet network.

PAM-PiCo-Five

X-1

Combined Upmix/Downmix Processor – surround to stereo and back, all in one box. The X-1 provides a flexible, transparent interoperability between 5.1 and stereo audio all in one unit which is easily controllable from any PC.

Flex Control Network

The Flex platform consists of a range of intelligent devices and interfaces that can combine to create systems for solving even the most complex control problems.

GTP-32 System Controller

Offering simple, cost-effective, and easily accessible solutions the GTP 32 Controls and monitors equipment in any location.

GTP-32

The GTP Control processor is a powerful control node of the Flex control network, with dual redundant power supplies and isolated IO it is ideally suited for mission critical applications.

GTP-V1

Commonly used in expandable cloud playout solutions including the popular Elemental interface, the V-GTP Control processor is a cloud deployable virtual Flex control node deployable on VMWare and Hyper-V.

CP30

The CP30 Control Panel, combined with our GTP Control Processor, offers a tactile user interface with the speed and responsiveness operators demand, and the transport control they require.

SPS-4200

The Flex Network Playout Control System provides fast, simple and reliable control and automation playout as a primary or a backup/tertiary system.

MOS Playout System

With a straightforward architecture, shallow learning curve and operator-centric user interface, the MOS Playout System can be easily configured to fit specific aspects of any workflow.

TallyMan Advanced Control Systems

With over 2,000 installations worldwide, TallyMan Advanced Broadcast Control simplifies complex broadcast workflows and eliminates human error to allow operators to focus on the task hand.

TM1-Tally

Compact, feature-rich, low-cost tally solution to simplify workflows and support key requirements of tally in any OB Truck or facility environment.

TM1 Mk3+

TallyMan sits at the heart of any broadcast system, coordinating critical broadcast infrastructure components and with protocol agnostic integration, provides operators with a common platform to universally control equipment from different vendors including routers, multiviewers, vision mixers, audio consoles, robotic cameras, intercom systems, media servers, automation systems and more. TallyMan System Controller is easy to deploy, reducing costs and providing customers with the flexibility to maintain complete ownership of their environment.

ESP-1R+

The TallyMan Interface unit, the ESP-1R+ consists of 1 x 32 tally input, 32 x open collector tally output, 64 x isolated relays O/Ps, 1 x RS422 and 1 x ethernet

TMCP-16 Control Panel

The TMCP-16 Control Panel is a 1U Control Panel with 16 TFT user definable push buttons.

TMCP-32 Control Panel

The TMCP-32 is a 2U TallyMan control panel with 32 TFT user definable push buttons.

TMCP-48 Control Panel

The TMCP-48 is a 2U TallyMan Control Panel with 48 TFT user definable push buttons.

TMVP (Virtual Panel)

Fully customisable user interface that brings signal flow management and monitoring and device management to users in an intuitive control surface.

ST600-KiPro

A control panel that operates over IP for the AJA KiPro family of DDRs. It is a high-quality and affordable controller for sports broadcasting

SW2x1-9

An ideal solution for emergency changeover operations with additional GPI control options.

SW2x1 Housing

The SW2x1 Housing system conveniently mounts and powers SW2x1 switch cards within it's 1RU frame.

BP-32

AIB 2

Designed for applications in A/V, industrial, radio, and television broadcasting, the AIB allows users to bridge systems and achieve that key bit of functionality they require without performing any programming.

AIB 3

Designed for applications in A/V, industrial, radio, and television broadcasting, the AIB allows users to bridge systems and achieve that key bit of functionality they require without performing any programming.

AIB4

Perform powerful functions with the AIB-4, for example cut shows remotely from your home facility or transport GPIs and On-Air Tallies into the field, wherever you need them – across cities, states, even continents.

IP Control Buddy

Controlling any GPI/O, IP, RS422, or RS232 enabled device, located anywhere from a single button push.

USP3-8D

USP3-8 is a push-button panel that is ideal for when users must interact quickly between active sources and when multiple switch commands must be activated simultaneously.

USP3-8D

USP3-8D is a push-button panel that is ideal for when users must interact quickly between active sources and when multiple switch commands must be activated simultaneously.

USP3-16

Providing a streamlined user interface, single panel monitoring and control of multiple devices, GPO, serial or Ethernet messaging, and more.

USP3-Shotbox

USP3-Shotbox is a push-button panel that is ideal for when users must interact quickly between active sources and when multiple switch commands must be activated simultaneously.

USP3-S24

The USP-S24 and USP-S48 panels provide extreme flexibility to the user. These panels have SNMP-Ethernet-Serial control capability. The multi-function push buttons can be programmed for Tally and Command functionality. Each panel can Control and Tally multiple devices and are perfect for Production Studios and Control Room integration.

USP3-S48

The USP-S24 and USP-S48 panels provide extreme flexibility to the user. These panels have SNMP-Ethernet-Serial control capability. The multi-function push buttons can be programmed for Tally and Command functionality. Each panel can Control and Tally multiple devices and are perfect for Production Studios and Control Room integration.

USP3-S48R

The USP-S24 and USP-S48 panels provide extreme flexibility to the user. These panels have SNMP-Ethernet-Serial control capability. The multi-function push buttons can be programmed for Tally and Command functionality. Each panel can Control and Tally multiple devices and are perfect for Production Studios and Control Room integration.

UMD-D8C

TSL Products’ range of under monitor displays (UMD) compliments the TallyMan Control Systems range, offering clear, bright mnemonics with comprehensive tally indications. The UMD-D8C is a dynamic tricolour 8 character under monitor display.

UMD-Dual-D8C

UMD-Dual-D8C is a dual dynamic tricolour 16 character under monitor display.

UMD-D16C

The UMD-D16C is a dynamic tricolour 16 character under monitor display.

PSU22/2

The PSU22/2 is the UMD power supply unit with twin dual-redundant PSUs. A single serial connection from a Controller provides UMD data and the signal is distributed along with power to up to 96 UMD via the RJ45 connections on the back.

MPA1-SOLO-IP

Whether monitoring redundant SDI infrastructures or redundant IP networks, the MPA1-SOLO-IP provides confidence monitoring without compromise.

MPA1-MIX-NET

MPA1-MIX-NET provides the known and loved MPA1-MIX functionality for ST 2110 AoIP networks, with NMOS IS-04 and IS-05 support. Mix up to 8 independent mono or stereo sources from 64 channels of AoIP or MADI connectivity with dedicated hardware controls for each source. A unit depth of only 100mm and fanless design means this is suitable for all installations.

MPA1-SOLO-8

High quality audio monitoring of AES and Analogue audio sources with fast and intuitive scroll to listen operation of any chosen audio pair.

MPA1-MIX-8

High quality audio monitoring of AES and Analogue audio sources with fast and intuitive stereo monitor mixing of up to 8 AES and Analogue audio pairs

PAM1-MK2-Dolby

Support for Dolby E®, Dolby Digital® and Dolby Digital Plus®

PAM2-MK2-Dolby

With support for Dolby E®, Dolby Digital® and Dolby Digital Plus® our flagship PAM2-MK2-Dolby provides fast and efficient monitoring of incoming or outgoing audio.

AMU1-3G

The AMU1-3G is designed for use in environments where simple monitoring of stereo embedded audio is required.

AMU1-CHD+

Simple to configure and straightforward to operate, the AMU1-CHD+ is the ideal choice for any operational position where stereo audio monitoring from an embedded source is mandated.

AMU2-2MHD+ PM2

The AMU2-2MHD+ is a full rack 2RU x 310mm deep Audio Monitoring Unit with two Sifam moving coil meters.

SAM1-3G-SDI

A highly cost-effective audio monitoring unit which gives a degree of agility to operators which has previously been reserved for much more expensive devices.

SAM1-MADI

A highly cost-effective audio monitoring unit which gives a degree of agility to operators which has previously been reserved for much more expensive devices.

SNMP Control of the MPA1 Range

Did you know that through SNMP connectivity you can remotely control our range of MPA1 Confidence Audio Monitors, allowing for a wider and integrated solution.

FlashBoard System

Cost-effective and highly customisable display system that provides critical information at point of use, for display on monitor walls or distributed wirelessly to tablets.

PDU14PMiD

Our intelligent units provide all the functionality you need to centrally control, manage and configure your rack based equipment.

PDU14PM-iD-Changeover

Our intelligent units provide all the functionality you need to centrally control, manage and configure your rack based equipment. This version provides on-board changeover capabilities, which will swap the power supply to the backup, if the original fails.

MDU12-PMI

The MDU12-PMi is a Power manager mains distribution unit, 12 way, 16 x GPIs, ethernet output monitoring and alarms – email and SNMP, individually controlled latching relays, sequential & delay power up with current sense network monitoring

MDU12-PAi

Power alert mains distribution unit, 12 way, 16 x GPI, ethernet output monitoring and alarms – email and SNMP. Networked current and power factor measurement for each outlet and unit total.

MDU12-PM

The MDU12-PM is a Power managing mains distribution unit – 12 way, 16 x GPIs, ethernet output monitoring, alarms, email and SNMP. Also features individually controlled latching relays and sequential & delay power up.

PDU14C

Our new Basic Power Units provide reliable and superior power distribution capabilities.

MDU14-B

The MDU14-B is a power standard mains distribution unit, 14 way, with cable tie bar

MDU14-B-32A

The MDU14-b-32A is a 32 Amp version Power standard mains distribution unit, 14 way, with cable tie bar

Vertical Power Distribution Unit

The new vertical design utilises unique high density IEC Connectors to provide the highest density available.

InSite

InSite provide facilities with monitoring, reporting and alarming on the performance of deployed devices, power consumption and environmental information.

MDU2-CO

The MDU2-CO is a Power change over switch, 2 way, 16A Neutrik in/out for basic and intelligent MDU supply.

MDU14-CO

The MDU14-CO is a Power change over mains distribution unit, 14 way, dual input change over and cable tie bar.