Expansion Units ESP-1R+
This GPIO expansion unit for TallyMan Control Systems connects to a System Controller over IP. The ESP-1R+ can be used to expand the available GPIO or simply provide GPIO in a remote location.
The TallyMan Interface unit, the ESP-1R+ consists of 1 x 32 tally input, 32 x open collector tally output, 64 x isolated relays O/Ps, 1 x RS422 and 1 x ethernet
-
- 32 Parallel inputs
- 32 Open collector parallel outputs
- 64 Isolated relay outputs
- i/ps and open collector o/ps configured in blocks of 8
- RS422 serial port for added connectivity
- Ethernet connection to the TallyMan system
-
- Form: 1RU Rackmount
- ENET: 1 x 100Mb Ethernet Ports
- GPI: 32
- GPO: 32 (Open Collector) + 64 (Isolated Relay)
- Serial 1 x RS422
- Power Consumption: 25w
Where To Buy
"Timeline TV have been using TSL products for a number of years across our whole fleet of outside broadcast vehicles and critical technical infrastructure so another PAM2 MK2 was the obvious choice. Line timing is absolutely critical for Dolby Atmos and the PAM2 allows us to decode the Dolby and check each component is as we would expect."
Lee Wright, Senior Broadcast Engineer