Ready for Orders MPA1-SOLO-IP

As the latest addition to the MPA1 Range, the MPA1-SOLO-IP  helps make the transition to IP seamless, providing peace of  mind and ease of use in even the most demanding environments.

Featuring 2 SFP cages the MPA1-SOLO-IP allows redundant  connectivity to ST-2022-6 / ST-2110 IP networks, in addition  to SDI, AES and Analogue inputs also allowing for hybrid  monitoring environments.

Tight integration with your control system is made possible through SNMP, Ember+ and NMOS.

Download Brochure Download Datasheet Where to Buy
      • 2 x SFP ports for redundant monitoring of ST-2110 and ST-2022-6 video and audio sources using optional Embrionix Modules. (TSL recommends Riedel MNSet for module configuration).
      • Audio monitoring of 16 audio channels, with intuitive ‘scroll to hear’ selection.
      • Front panel video display of 3G/HD/SD sources
      • 2 x Balanced Analogue Inputs on XLR connectors.
      • 1 x AES3id input on BNC.
      • 2 x SFP ports for redundant monitoring of SDI over Fibre (optional SFP’s required).
      • 1 x Ethernet connection for monitoring and control via a web-browser and SNMP.
      • 1 x front panel USB connector for system updates.
      • 2 x Line Level Balanced Analogue Outputs for connection to external loudspeakers. Line level with selectable mute and -20dB.
      • 1 x SDI Loop Thru (with selectable ‘fixed’ or ‘follow’ modes).
      • 1 x HDMI Output.
    Previous Next
      • Height: 1RU
      • Dimensions: 483mm x 45mm x 100mm
      • Weight: 1-4kg
      • Display: Audio Metering
      • 16 Audio channels
      • Signal to Noise Ratio: 72dB (+4dBu input level, THD+N A weighted)
      • Peak Acoustic Output: 90dB @ 1foot
      • Frequency Repsonse: 40Hz to 20kHz +/- 1dB
      • Power: 85-264V ~ 50/60Hz, 0.75A – 0.5A Max 30W
      • Unit control: SNMP, Webpage
      • IP control: In Band NMOS, Ember+, Embrionix RESTful API
      • SDI inputs: 3G/HD/SD-SDI (SMPTE 424M, 292M, 259M)
      • AES 3id: SMPTE 276M
      • Balanced analogue Inputs: >60k Ohms
      • Balanced Analogue Outputs: Fixed or Variable
      • SFP cages: Non-MSA Embrionix Modules
      • Upgrades: VIA USB
    Previous Next
Contact Us

Trusted By

Previous Next

Where To Buy

map Select your destination

"Timeline TV have been using TSL products for a number of years across our whole fleet of outside broadcast vehicles and critical technical infrastructure so another PAM2 MK2 was the obvious choice. Line timing is absolutely critical for Dolby Atmos and the PAM2 allows us to decode the Dolby and check each component is as we would expect."

Lee Wright, Senior Broadcast Engineer