PAM Range PAM2 MK2

Our flagship Precision Audio Monitor (PAM) range supports stereo, multichannel, multi-language and surround sound environments via a sophisticated, intuitive control interface.

PAM2 MK2 Front and Rear View with standards
      • Fully configurable analogue and digital multichannel outputs
      • Full support for Dolby E®, Dolby Digital® and Dolby Digital Plus® (Dolby version only)
      • Supports EBU and ATSC standards in addition to user configurable measurements
      • Dual high resolution 3.4″ OLED screens for 16 bargraphs, setup and metadata display
      • User defined pre-sets to switch I/O setup or loudness measurements at the push of a button
      • Downmix of discreet multichannel audio to stereo for compatibility monitoring
      • Multichannel audio outputs for external stereo or 5.1 loudspeaker system integration
      • Pushes PAM data to the monitor wall, with use configurable quadrants and HD-SDI output
      • Choice of user selectable bargraph scales (BBC PPM, EBU PPM, EBU Digital, Nordic,VU and DIN)
      • User programmable presets. 5 by hardware buttons, GPI and 24 internal, accessible by high level menu selection
      • Variable stereo analogue outputs
      • High quality internal full range loudspeaker system
      • Serial remote control
      • Headphone output with LS muting
      • User Programmable ‘Assign Matrix’
      • Audio Output Delay
      • Automatic mode switching – depending on signal type
      • Hi Resolution Video confidence monitoring
      • Re-clocked HD/SDI with down converted SDI or composite (PAL.NTSC) video outputs selected via rear panel Config. Switch
    Previous Next
      • Fixed or variable analogue multichannel outputs (8 mono)
      • Fixed or variable AES multichannel outputs (4 pairs/8 Channels)
      • Dual 12V DC inputs
      • Compact, lightweight (weight tbc) 1RU case, 250mm deep
      • Dual auto-sensing, 1080p (60, 59, 94 and 50Hz), HD/SDI video inputs
      • 4 AES (4 Pairs/8 Channel) Inputs– 110Ohm Balanced or 75Ohm unbalanced via optional CAB-D25-BNC cable
      • 2 Analogue Stereo Inputs
      • 1 x USB connector for system updates and preset save/recall
      • 1 x SD card slot for system updates and preset save/recall ‘Scroll To Hear’
      • ITU BS1770/71 loudness measurement and Histogram
      • SMTPE2020 metadata monitoring
    Previous Next
Contact Us

Trusted By

Where To Buy

TSL Products’ commitment to supporting emerging IP standards such as AES-67, SMPTE 2022-6 and SMPTE 2110 gave us the confidence we needed in the PAM2-IP to provide the audio monitoring we required at RTL City. Additionally, knowing that we could deploy the PAM2-IP in our new all-IP infrastructure without being forced to change our operational workflows was fundamental to our purchase decision.

Costas Colombus, Director of Technology projects and Support at BCE.