PAM Range PAM2 MK2 Dolby

With support for Dolby E®, Dolby Digital® and Dolby Digital Plus® our flagship PAM1 MK2 Dolby provides fast and efficient monitoring of incoming or outgoing audio.

      • Bitstream monitoring via a clear and confi gurable user interface
      • Dolby CRC error count and Dolby E line position
      • Downmix monitoring via the Dolby CAT1100
      • Ability to monitor in sync using the AV off set to cater for any inherent delay
      • User defined pre-sets to switch I/O setup or loudness measurements at the push of a button
      • Downmix of discreet multichannel audio to stereo for compatibility monitoring
      • Multichannel audio outputs for external stereo or 5.1 loudspeaker system integration
      • Choice of user selectable bargraph scales (BBC PPM, EBU PPM, EBU Digital, Nordic,VU and DIN)
      • User programmable presets; 5 by hardware buttons, GPI and 24 internal, accessible by high level menu selection
      • Factory preset recall – 5 presets selecting SDI1, SDI2, AES, Analogue and Optical Inputs
      • Variable stereo analogue outputs
      • High quality internal full range loudspeaker system
      • Variable LED brightness control
      • Serial remote control
      • Headphone output with LS muting
      • User Programmable ‘Assign Matrix’
      • Audio Output Delay
      • Automatic mode switching – depending on signal type
      • Hi Resolution Video confidence monitoring
      • Re-clocked HD/SDI with down converted SDI or composite (PAL.NTSC) video outputs selected via rear panel Config. Switch
      • Dual high resolution 2.4″ screens for 16 bargraphs, setup and metadata display.
    Previous Next
      • Fixed or variable analogue multichannel outputs (8 mono)
      • Fixed or variable AES multichannel outputs (4 pairs/8 Channels)
      • Dual 12V DC inputs
      • Compact, lightweight (weight tbc) 1RU case, 250mm deep
      • SMTPE2020 metadata monitoring
      • Dual auto-sensing, 1080p (60, 59, 94 and 50Hz), HD/SDI video inputs
      • 4 AES (4 Pairs/8 Channel) Inputs– 110Ohm Balanced or 75Ohm unbalanced via optional CAB-D25-BNC cable
      • 2 Analogue Stereo Inputs
      • 1 x Ethernet for Network connectivity
      • 1 x USB connector for system updates and preset save/recall
      • 1 x SD card slot for system updates and preset save/recall ‘Scroll To Hear’
      • ITU BS1770/71 loudness measurement and Histogram
    Previous Next
Ask an Expert

Trusted By

Where To Buy

“The TSL PAM2 MK2 gives us the power to monitor loudness for compliance with new broadcast standards, accurately meter audio for many sources and provide phase information. We are very pleased with the performance of the PAM2 MK2 units.”

Mr. Chu Cun, Head of Technical Operations at Beijing TV