PAM Range PAM1 MK2 Dolby

With support for Dolby E®, Dolby Digital® and Dolby Digital Plus® our flagship PAM1 MK2 Dolby provides fast and efficient monitoring of incoming or outgoing audio.

      • Bitstream monitoring via a clear and confi gurable user interface
      • Dolby CRC error count and Dolby E line position
      • Downmix monitoring via the Dolby CAT1100
      • Ability to monitor in sync using the AV off set to cater for any inherent delay
      • User defined pre-sets to switch I/O setup or loudness measurements at the push of a button
      • SMTPE2020 metadata monitoring
      • Dual auto-sensing, 1080p (60, 59, 94 and 50Hz), HD/SDI video inputs
      • 4 AES (4 Pairs/8 Channel) Inputs– 110Ohm Balanced or 75Ohm unbalanced via optional CAB-D25-BNC cable
      • 2 Analogue Stereo Inputs
      • Ethernet for Network connectivity
      • USB connector for system updates and preset save/recall
      • SD card slot for system updates and preset save/recall ‘Scroll To Hear’ – top level bargraph navigation using rotary encoder
      • Downmix of discreet multichannel audio to stereo for compatibility monitoring
      • Multichannel audio outputs for external stereo or 5.1 loudspeaker system integration
      • ITU BS1770/71 loudness measurement and Histogram
      • User Programmable ‘Assign Matrix’
      • Audio Output Delay
      • Automatic mode switching – depending on signal type
      • Hi Resolution Video confidence monitoring
      • Re-clocked HD/SDI with down converted SDI or composite (PAL.NTSC) video outputs selected via rear panel Config. Switch
      • Dual high resolution 2.4″ screens for 16 bargraphs, setup and metadata display.
    Previous Next
      • Choice of user selectable bargraph scales (BBC PPM, EBU PPM, EBU Digital, Nordic,VU and DIN)
      • User programmable presets. 5 by hardware buttons, GPI and 24 internal, accessible by high level menu selection
      • Factory preset recall – 5 presets selecting SDI1, SDI2, AES, Analogue and Optical Inputs
      • Fixed or variable analogue multichannel outputs (8 mono)
      • Fixed or variable AES multichannel outputs (4 pairs/8 Channels)
      • Variable stereo analogue outputs
      • High quality internal full range loudspeaker system
      • Variable LED brightness control
      • Dual 12V DC inputs
      • Serial remote control
      • Headphone output with LS muting
      • Compact, lightweight (weight tbc) 1RU case, 250mm deep
    Previous Next
Contact Us

Trusted By

Where To Buy

“The PAM2 MK2 is an excellent fit for Dubai TV as we move them forward with a 3G-enabled workflow – it really takes the complexity out of complex and critical audio tasks – especially with regards to Dolby decoding and loudness-compliance monitoring“

Mohamed Hamid, Project Sales Manager, Qvest Media