DDR Augmentation ST600 KiPro

Using a standard web-browser, enter the ST600’s static IP address to access its configuration web page and view the list of clips for the currently selected Ki Pro. Click on LOAD to load the selected clip, or enter a clip name and click on CREATE & RECORD to create a new clip and put the DDR into record.

ST600 provides Record, Play, Stop, Fast Forward, Rewind, Jog, and Search to Time transport control. The ST600’s LCD display shows the currently loaded clip name and its current playback time.

Press the MARK key to save the loaded clip name and current playback time into one of 20 cue point locations. Use the UP and DOWN arrow keys to scroll through the cue point locations. Press the GOTO key to load the saved clip name and then search to the save timecode position.

Where to Buy
    • Supports 4- Ki Pro DDRs over IP
    • View List of Available Clips, Select & Load Clip
    • Create, Name, & Record Clips
    • Transport Control & Loop Mode
    • Ganged Record and Playback
    • 20 Cue Points per DDR; Mark Cue(Save Clip Name & Time), Recall Cue(Load Clip & Cue to Time)
    • Form: Desktop
    • ENET: 1 x 100Mb Ethernet
    • 1 x RS422
    • 1 x Control Wheel
    • LCD Display
    • GPIO: 8 In / 8 OUT
Contact Us

Trusted By

Previous Next

Where To Buy

map Select your destination

When we started designing our newest OB truck, we were looking for the smallest form audio monitoring unit we could find, that would be flexible and easy to use for our VT operators, and the new MPA1 Solo SDI was just the ticket.

Paul Fournier, Head of Audio at NEP UK